383 (440 hp @5000 rpm at the rear wheels when last dynoed 440 ft pound of torque at around 3700 rpm)bored .030 over , edelbrock 800 cfm carb air gap manifold ,rpm cam ,aluminum heads,JE forged pistons (10.3:1 compression ratio),6" h-beam rods.forged stroker crank,full roller rockers ,roller lifters and of course a 4 bolt main block .customized headers , 3" dual exsaust with h-pipe, flowmaster 50 seiries mufflers. 4L80E trans with a bitchin adjustable stand alone computer,ford 9in rear end with 4:10 posi,willwood disc brakes (13" up front and 12" in the rear with 4 piston calipers), rear clip narrowed 14 inches to accomodate more rubber.rear frame work can be seen at www.ifcustom.com,go to completed vehicles ,then go to rudys mazda
your typical shaveing stuff
bagged . wishbone setup in rear.www.ifcustom.com,completed vehicles,then rudy's mazda.
20x13.5(345/25/20)rear and 20x8 up front.
4 12" orion H-2 subs and 2 massive audio ca 200 amps and 2 ca 100 amps, mb quart 6.5 and 5.5 mids and tweet's pioneer p930 head unit.
people's reaction when i rumble by
drive and drag my truck and enjoy it to the fullest.
