Photos
was going to use this cab, but all i need is the rear doors..
2008-12-01
donor sdime
2008-12-01
envoy will be a donor as well
2008-12-04
envoy after it was stripped
2008-12-01
envoy cut, and crew cab door hung
2008-12-01
gettin there..
2008-12-01
everythgin together.. just needs to be welded..
2008-12-01
thats right a 5th door.. lol
2008-12-01
yes it will have a roof rack
2008-12-01
talk about room!
2008-12-07
inners modifed and welded in.. looks almost factory, minus the plug welds..
2008-12-07
rockers had to be pie cut to match the jam width, btu they are good to go!
2008-12-07
roof tacd
2008-12-15
roof fully welded, and roof seams shaved
2008-12-15
the plan missing alot of details.. lol
2008-12-15
frame cut
2008-12-27
start of the frame stretching
2008-12-27
body mocked up on stretched frame..
2008-12-27
mocked up.. rolled it outside for a pic
2009-01-12
pics of the frame
2009-01-12
pic of the frame all done, body mounts and driveshaft xmember welded in
2009-01-12
hand made floor...
2009-01-12
startin on the temporary interior ( color and carpet are just temporary)
2009-01-12
interior back together
2009-02-11
drivable!
2009-02-11
picture after about 200 miles on it.. yeah salty as road here in new jersey
2009-02-11
gmc hood on
2009-02-11
2009-02-11
2009-02-11
Exterior
envoy body with rear crewcab doors, with and extd cab s10 portion welded on the back with the 3rd door
Future Plans
4wd with a 3" body lift, one piece driveshaft, 5.7 vortec, leather or vinyl interior, envoy front end, thsi will be a daily driver/tow pig...
